Polyurethane Thinner

Home Products Polyurethane Thinner
PU Coating Thinners

Polyurethane Thinner in Ahmedabad

A solvent should be used for polyurethane coatings which not only dilutes properly but does not affect the hardness of the film after curing. JYOTI 444 is our polyurethane thinner designed especially for this purpose. It is a combination of aromatic hydrocarbons, esters, and ketones and is used mainly for polyurethane sealer, primer, clear coat, and pigmented top coat paints.

Apart from thinning purposes, this solvent also serves as an effective cleaning agent to clean tools after applying polyurethane paint.

Aromatic hydrocarbon, ester, and ketone Suitable for all types Achieves proper paint consistency Doubles as a cleaning solvent
KEY PERFORMANCE ADVANTAGES

Special Key Features

What sets a good insulating varnish apart isn't just that it dries it’s how the cured film behaves afterward. Our air drying formulations offer:

Aromatic hydrocarbon, ester, and ketone solvent

Aromatic hydrocarbon, ester, and ketone solvent blend

Suitable for all types of solvent-based

Suitable for all types of solvent-based polyurethane sealer, primer, clear, and pigmented topcoat

Achieves proper paint consistency for spray

Achieves proper paint consistency for spray or brush application

Doubles as a cleaning solvent

Doubles as a cleaning solvent for tools after PU paint application

Clear, transparent appearance with a mild

Clear, transparent appearance with a mild aromatic odor

Tested for thermal endurance and long-term

Tested for thermal endurance and long-term durability

Process Guide

Application Method

The Polyurethane Thinner is added to the sealer, primer, or top coat in order to create the necessary consistency of the paint to use the appropriate application method. The thinner should be stored in a cool, dry, and well-ventilated place as the polyurethane thinners deteriorate when exposed to the elements.

When it comes to cleaning tools, the polyurethane thinner will be very efficient if applied straight after applying the polyurethane coating while it still hasn’t started curing on the tools.

Recommended Application Modes
1
Spraying
For uniform coverage on large batch components
2
Brushing
Simple hand application for small components or repairs
3
Dipping
Full submersion for complex-shaped parts
4
60-Min Second Coat
Re-apply after 60 min for extra protection
Technical Parameters

Specifications

Clear, transparent color with a mild aromatic odor. Specific gravity is approximately 0.88 ± 0.02, with a flash point above 25°C. Shelf life is best before 6 months when stored in a PET bottle under proper conditions.

Thermal Class Class B (130°C), F-Class & H-Class Available
Resin Foundation Phenolic Resin-Based Formulations
Curing Mechanism Room Temperature Air Drying (Heat Optional)
Operating Climate Typically 0°C to 55°C Ambient Range
Available Shades Clear, Golden, Amber Shades
Versatile Protection

Uses & Applications

This varnish range is used extensively as a finishing, impregnating, and protective coating across a wide set of electrical applications, including:

Diluting solvent-based polyurethane sealers to spray

Diluting solvent-based polyurethane sealers to spray or brush consistency

Thinning polyurethane primers before application

Thinning polyurethane primers before application

Reducing clear and pigmented polyurethane topcoats

Reducing clear and pigmented polyurethane topcoats

Cleaning tools and equipment immediately after

Cleaning tools and equipment immediately after polyurethane paint application

General protective coating for industrial equipment

General protective coating for industrial equipment

Across all these applications, the core job stays the same — shielding sensitive electrical parts from moisture, chemical exposure, and the general wear of daily operating conditions.

MANUFACTURING TRUST SINCE 1988

Why Choose Us

The wrong thinner could have an influence on leveling, drying, and overall performance of the polyurethane coating because consistency plays a key role when you work with pigmented topcoats. Our Polyurethane Thinner is designed to be used only with PU sealers, primers, and topcoats and will provide you with stable properties without any unpleasant surprises during the thinning process.

Its efficiency in tool cleaning makes this product the standard accessory for the users of our polyurethane coatings range.

Trusted by Leading Names

Proven across critical applications in power, railways, defense and manufacturing:

NTPC Indian Railways HAL Tata ONGC Adani Polycab L&T
Got Questions?

FAQs

It's used to dilute solvent-based polyurethane sealers, primers, clear coats, and pigmented topcoats to the correct application consistency.

Yes, it's effective for cleaning tools immediately after polyurethane paint application, before the coating cures.

It's best used within 6 months when stored in a PET bottle under proper conditions.

It should be kept in a cool, dry, well-ventilated place, away from moisture, heat, and direct sunlight.

It's a clear, transparent liquid with a mild aromatic odor.

Explore Our Complete Polyurethane Thinner Range

Find the exact formulation for your motor winding, transformer coating, or industrial application.