Polyurethane Casting Compound

Home Products Polyurethane Casting Compound
Flexible Encapsulation Systems

Polyurethane Casting Compound Manufacturer

Outdoor electrical equipment doesn't get the luxury of a controlled environment — cable joints buried underground and switchgear exposed to seasonal temperature swings both need a casting compound that stays flexible rather than cracking under repeated thermal cycling. Our Polyurethane Casting Compound, built around JYOTI 14401 combined with Hardener 1200, is formulated specifically for that kind of demanding, exposed-to-the-elements application.

This system comprises two parts that cure at ambient temperature with JYOTI 14401 acting as the filled, solventless resin reacting with Hardener 1200 as an aromatic isocyanate by a polyaddition process, leading to the formation of a truly flexible polymer, not a hard casting liable to break at different temperatures.

Two-component polyurethane system Low volume shrinkage and low Flexible cured mass that handles Good resistance to electrical tracking
KEY PERFORMANCE ADVANTAGES

Special Key Features

What sets a good insulating varnish apart isn't just that it dries it’s how the cured film behaves afterward. Our air drying formulations offer:

Two-component, room-temperature curing polyurethane system

Two-component, room-temperature curing polyurethane system

Low volume shrinkage and low exotherm

Low volume shrinkage and low exotherm during cure, avoiding internal stress

Flexible cured mass that handles repeated

Flexible cured mass that handles repeated temperature cycling without cracking

Good resistance to electrical tracking

Good resistance to electrical tracking

Strong adhesion, including to cross-linked polyethylene

Strong adhesion, including to cross-linked polyethylene (XLPE) cable insulation

Suitable for electrical components rated up

Suitable for electrical components rated up to 120°C (Class E)

Process Guide

Application Method

The resin component, JYOTI 14401, should be stirred before use, since its filler content settles during storage. Once stirred, it's mixed with Hardener 1200 in the recommended proportion at room temperature (20-40°C), then applied for casting or potting within the mixture's pot life. Given that this is a fast-reactive system, the working window is genuinely limited, so it's best practice to mix only the quantity that can be used before the compound begins to set.

Ensure proper surface preparation and follow viscosity guidelines for optimal coverage.

Recommended Application Modes
1
Spraying
For uniform coverage on large batch components
2
Brushing
Simple hand application for small components or repairs
3
Dipping
Full submersion for complex-shaped parts
4
60-Min Second Coat
Re-apply after 60 min for extra protection
Technical Parameters

Specifications

Formulated as a filled, solventless, two-component polyurethane casting system, rated for electrical components operating up to 120°C (Class E). The cured compound offers low shrinkage, low exotherm, flexibility through thermal cycling, and good resistance to tracking.

Thermal Class Class B (130°C), F-Class & H-Class Available
Resin Foundation Phenolic Resin-Based Formulations
Curing Mechanism Room Temperature Air Drying (Heat Optional)
Operating Climate Typically 0°C to 55°C Ambient Range
Available Shades Clear, Golden, Amber Shades
Versatile Protection

Uses & Applications

This varnish range is used extensively as a finishing, impregnating, and protective coating across a wide set of electrical applications, including:

Sealing cable joints on low

Sealing cable joints on low and high voltage cables, including XLPE cable systems

Potting and encapsulating switchgear components exposed

Potting and encapsulating switchgear components exposed to outdoor conditions

Casting electrical and electronic components requiring

Casting electrical and electronic components requiring flexibility under thermal stress

Applications where cracking or stress fracture

Applications where cracking or stress fracture in a rigid cast would be unacceptable

General protective coating for industrial equipment

General protective coating for industrial equipment

Across all these applications, the core job stays the same — shielding sensitive electrical parts from moisture, chemical exposure, and the general wear of daily operating conditions.

MANUFACTURING TRUST SINCE 1988

Why Choose Us

A rigid casting compound might perform fine in a lab, but underground cable joints and outdoor switchgear see a very different reality — seasonal heat, cold, and everything in between. Our polyurethane casting compound is engineered specifically for that flexibility requirement, giving fabricators a genuinely stress-free cure that holds up where rigid alternatives eventually crack.

That real-world reliability is why this compound continues to be specified for cable joint sealing and outdoor electrical equipment across power distribution and industrial applications.

Trusted by Leading Names

Proven across critical applications in power, railways, defense and manufacturing:

NTPC Indian Railways HAL Tata ONGC Adani Polycab L&T
Got Questions?

FAQs

Polyurethane Casting Compound is engineered for coating, insulating, and protecting industrial components.

It can be applied via spraying, dipping, or brushing depending on application needs.

We manufacture grades covering B-Class, F-Class, and H-Class thermal requirements.

Yes, matching thinners can be used to achieve optimum application viscosity.

All products are manufactured at our facility in Ahmedabad, Gujarat with ISO 9001:2015 certification.

Explore Our Complete Polyurethane Casting Compound Range

Find the exact formulation for your motor winding, transformer coating, or industrial application.