NC Clear Lacquer

Home Products NC Clear Lacquer
Clear Gloss Coatings

Nitrocellulose Lacquer Manufacturer

Some finishing jobs simply can't wait around for an overnight cure — a furniture workshop running multiple units through in a day needs a lacquer that's ready to handle within the hour, not the next morning. This NC Clear Lacquer is specifically designed to meet the needs of those high speeds, using a combination of nitrocellulose and alkyd resin to create a fast-drying, truly clear topcoat without compromising on protection.

The most important feature of this product is its clarity. It performs much like an N.C. Auto Lacquer topcoat system, and both gloss level and overall appearance can be adjusted depending on how the final surface needs to look. Underneath that clean finish, it also holds up well against water exposure, cracking, chalking, and blistering — the kind of gradual damage that dulls a lesser lacquer within months.

Fast-drying nitrocellulose and alkyd resin Excellent clarity, enhancing gloss Good resistance to water, cracking, Smooth, matt finish with adjustable
KEY PERFORMANCE ADVANTAGES

Special Key Features

What sets a good insulating varnish apart isn't just that it dries it’s how the cured film behaves afterward. Our air drying formulations offer:

Fast-drying nitrocellulose and alkyd resin blend

Fast-drying nitrocellulose and alkyd resin blend

Excellent clarity, enhancing gloss and appearance

Excellent clarity, enhancing gloss and appearance as needed

Good resistance to water, cracking, chalking,

Good resistance to water, cracking, chalking, and blistering

Smooth, matt finish with adjustable gloss

Smooth, matt finish with adjustable gloss level

Surface dry in just 10-15 minutes,

Surface dry in just 10-15 minutes, with tack dry in 30-40 minutes

Suitable as both a standalone finish

Suitable as both a standalone finish and a topcoat over wood stain

Process Guide

Application Method

NC Clear Lacquer can be applied by spray, brush, or even cloth application, depending on the surface and finish quality required. This is usually done in the proportion of 1:2 (lacquer to Jyoti N.C. Thinner-702). Most work needs 2 to 3 layers to produce the required gloss level and coating effect.

It dries in stages where it dries to the touch after 10-15 minutes, tack-dry after 30-40 minutes and fully dry in 24 hours. Due to its inflammability, it must be applied in an area with good ventilation and far from any open flame.

Recommended Application Modes
1
Spraying
For uniform coverage on large batch components
2
Brushing
Simple hand application for small components or repairs
3
Dipping
Full submersion for complex-shaped parts
4
60-Min Second Coat
Re-apply after 60 min for extra protection
Technical Parameters

Specifications

Solids content runs 38% to 42%, with a clear color, specific gravity of 0.94 ± 0.02, and viscosity of 100-120 seconds (FC4 Cup at 30°C, mixed 100 parts N.C. Clear to 40 parts Butyl Acetate). Covering capacity is approximately 80-90 sq. ft. per coat, with a smooth, matt finish as standard.

Thermal Class Class B (130°C), F-Class & H-Class Available
Resin Foundation Phenolic Resin-Based Formulations
Curing Mechanism Room Temperature Air Drying (Heat Optional)
Operating Climate Typically 0°C to 55°C Ambient Range
Available Shades Clear, Golden, Amber Shades
Versatile Protection

Uses & Applications

This varnish range is used extensively as a finishing, impregnating, and protective coating across a wide set of electrical applications, including:

Automobile surfaces

Automobile surfaces

Wooden furniture

Wooden furniture

Kitchen and cabinet work

Kitchen and cabinet work

As a clear topcoat over surfaces

As a clear topcoat over surfaces finished with Jyoti N.C. Wood Stain

General protective coating for industrial equipment

General protective coating for industrial equipment

Across all these applications, the core job stays the same — shielding sensitive electrical parts from moisture, chemical exposure, and the general wear of daily operating conditions.

MANUFACTURING TRUST SINCE 1988

Why Choose Us

A clear lacquer has to get two things right simultaneously — dry fast enough to keep production moving, and stay genuinely clear and durable once it's cured. Getting that balance wrong shows up quickly, whether as premature yellowing, cracking, or a finish that never quite loses its tack. Our NC Clear Lacquer has been refined to hold both properties together, backed by consistent solids content and viscosity from batch to batch.

This level of dependability, together with a long track record of coating production, is what continues to make this lacquer such an important choice when turnaround time is just as critical as the final product.

Trusted by Leading Names

Proven across critical applications in power, railways, defense and manufacturing:

NTPC Indian Railways HAL Tata ONGC Adani Polycab L&T
Got Questions?

FAQs

It's formulated from a combination of nitrocellulose and alkyd resin, offering a fast-drying, clear finish.

Most applications require 2 to 3 coats to achieve the desired gloss and protective film thickness.

It's thinned with Jyoti N.C. Thinner-702, mixed at a ratio of 1 part lacquer to 2 parts thinner.

Surface dry takes about 10-15 minutes, tack dry around 30-40 minutes, with full hard dry achieved overnight.

Yes, it works well as a clear topcoat over surfaces already finished with Jyoti N.C. Wood Stain.

Explore Our Complete NC Clear Lacquer Range

Find the exact formulation for your motor winding, transformer coating, or industrial application.