Epoxy Thinner

Home Products Epoxy Thinner
Resin Thinning Solutions

Epoxy Thinner in Ahmedabad

Epoxy coatings do not have the same characteristics as normal paints when they are mixed; wrong use of thinnners can alter the curing process of the epoxy coatings as much as altering their viscosity. JYOTI’s Epoxy Thinner such as JYOTI 666 is a product designed to work with epoxy paints, primers and other similar coating materials, allowing the user to alter viscosity without altering cure chemistry.

Besides acting as a thinner, the product is a very useful cleaner, which can be used to clean uncured epoxy coatings from tools.

Formulated specifically for epoxy paint Suitable for reducing viscosity Also functions as a cleaning Compatible with a range
KEY PERFORMANCE ADVANTAGES

Special Key Features

What sets a good insulating varnish apart isn't just that it dries it’s how the cured film behaves afterward. Our air drying formulations offer:

Formulated specifically for epoxy paint

Formulated specifically for epoxy paint and primer systems

Suitable for reducing viscosity

Suitable for reducing viscosity to the correct application consistency

Also functions as a cleaning solvent

Also functions as a cleaning solvent for uncured epoxy on tools and parts

Compatible with a range of epoxy-based

Compatible with a range of epoxy-based products (excluding tank lining-specific series)

Recommended usage follows the specific product's

Recommended usage follows the specific product's technical data sheet

Tested for thermal endurance and long-term

Tested for thermal endurance and long-term durability

Process Guide

Application Method

Epoxy Thinner is added to the epoxy paint or primer under constant stirring, which helps prevent separation of the mixture's constituents during dilution. The exact ratio depends on the target viscosity for the intended application method and the specific epoxy product's technical data sheet, since epoxy systems vary more in cure chemistry than standard lacquers.

For cleanup purposes, this thinner can be used to remove uncured epoxy from tools or parts that have been contaminated during application, provided the epoxy hasn't already begun to cure.

Recommended Application Modes
1
Spraying
For uniform coverage on large batch components
2
Brushing
Simple hand application for small components or repairs
3
Dipping
Full submersion for complex-shaped parts
4
60-Min Second Coat
Re-apply after 60 min for extra protection
Technical Parameters

Specifications

Used as a thinner for epoxy paints, primers, and other related products that can be mixed with epoxy paint. The use ratio may differ depending on the product as each epoxy paint is of a different grade.

Thermal Class Class B (130°C), F-Class & H-Class Available
Resin Foundation Phenolic Resin-Based Formulations
Curing Mechanism Room Temperature Air Drying (Heat Optional)
Operating Climate Typically 0°C to 55°C Ambient Range
Available Shades Clear, Golden, Amber Shades
Versatile Protection

Uses & Applications

This varnish range is used extensively as a finishing, impregnating, and protective coating across a wide set of electrical applications, including:

Reducing viscosity of epoxy paints

Reducing viscosity of epoxy paints and primers for application

Preparing epoxy coatings for spray

Preparing epoxy coatings for spray or brush application

Cleaning uncured epoxy residue from tools,

Cleaning uncured epoxy residue from tools, containers, and contaminated parts

General protective coating for industrial equipment

General protective coating for industrial equipment

General protective coating for industrial equipment

General protective coating for industrial equipment

Across all these applications, the core job stays the same — shielding sensitive electrical parts from moisture, chemical exposure, and the general wear of daily operating conditions.

MANUFACTURING TRUST SINCE 1988

Why Choose Us

Epoxy systems don't forgive an incompatible thinner the way ordinary paints sometimes do — the wrong solvent can interfere with cure or leave a compromised film behind. Our Epoxy Thinner is formulated specifically for compatibility with epoxy paint and primer chemistry, giving applicators consistent results without unexpected cure issues.

That compatibility, combined with its practical use as a cleanup solvent, is why this thinner has become a standard part of the toolkit for anyone working regularly with our epoxy coating range.

Trusted by Leading Names

Proven across critical applications in power, railways, defense and manufacturing:

NTPC Indian Railways HAL Tata ONGC Adani Polycab L&T
Got Questions?

FAQs

It's used to reduce the viscosity of epoxy paints and primers to the correct consistency for application.

Yes, it can be used to clean uncured epoxy residue from tools and parts before the epoxy has set.

It's suitable for most epoxy paint and primer systems, though tank lining-specific series may have different requirements — always check the specific product's data sheet.

It should be added under constant stirring to avoid separation of the mixture's constituents.

Recommended usage and mixing ratios are specified in the technical data sheet or application guide for the specific product being thinned.

Explore Our Complete Epoxy Thinner Range

Find the exact formulation for your motor winding, transformer coating, or industrial application.